ENAO1-MOD COMMUNICATION MODULE

Specifications Ethernet Interface Interface RJ-45 with Auto MDI/MDIX Transmission method Ethernet Type II Transmission cable Category 5e, 100米(Max) Transmission speed 10/100 Mbps Auto-Detection Network protocol ICMP, IP, TCP, UDP, DHCP, SMTP, MODBUS OVER TCP/IP, Delta Configuration RS-485 Connector Interface RJ-11 Transmission method RS-485 Transmission speed 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Communication format Stop bit: 1,2  Parity bit: None, Odd, Even  Data bit: 7,8  ASCII/RTU Communication protocol MODBUS RS-232 Connector Interface Mini Dim Transmission method RS-232 Transmission speed 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Communication format Stop bit: 1,2  Parity bit: None, Odd, Even  Data bit: 7,8  ASCII/RTU Communication protocol MODBUS, Delta Configuration Transmission cable DVPACAB215 / DVPACAB230 / DVPACAB2A30 Terminal Block Interface Feed-through terminal 10PIN Transmission method RS-485 Transmission distance 1,200m Transmission speed 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Communication format Stop bit: 1,2  Parity bit: None, Odd, Even  Data bit: 7,8  ASCII/RTU Communication protocol MODBUS Electrical Specifications Power voltage 24V DC (-15% ~ 20%) supplied by feed-through terminal Power consumption 3W Insulation voltage 500V Weight 140g

Downloads Manual catalogue Software